Plastic bottle making machine
- Packaging:
- standard export packing
- Brand:
- Bole Machinery
- Transportation:
- Ocean
- Place of Origin:
- Zhejiang, China
Basic Info
Model No.: BL1600EKH
Product Description
1600 ton bottle making machine
Plastic Bottle Making Machine
1. Cooperation with world top scientific R&D institutions
BOLE develop the relations of friendship and cooperation with world's leading plastic research and development institutions: the Institute of Plastics Processing (IKV) from RWTH Aachen University and the Institute of polymer from University of Paderborn.
Bole centre clamping structure
■ 100% clamping force use, 10%-20% higher than traditional toggle structure.
■ Less possibility of flash, save flash trim work.
■ Save 2-5% material.
■ Offer good protection to mould, platens and tie bars.
■ Opening stroke 10-20% longer.
■ 100% clamping force use, 10%-20% higher than traditional toggle structure.
■ Less possibility of flash, save flash trim work.
■ Save 2-5% material.
■ Offer good protection to mould, platens and tie bars.
■ Opening stroke 10-20% longer.
2. Product Instructions
| EKH系列超大注射量专用机技术参数表 | UNIT | BL1600EKH | ||
| 注射系统规格 | Internationalunite size | 65000L | 42000H | |
| 螺杆直径 | Screw diameter | Screw specifications | 专用 | 专用 |
| mm | 110 | 110 | ||
| 挤出螺杆长径比 | Screw L/D ratio | 28.0 | 28.0 | |
| 理论注射容积 | Theoretical injection capacity | cm3 | 71141 | 45530 |
| 注射量 (以PS计) | Shot weight(PS) | g | 65449 | 41888 |
| oz | 2312.7 | 1480.1 | ||
| 最大对空注射速率 | Injection rate into Air | cm^3/s | 2110 | 1350 |
| 最大对空注射速率 | g/S | 1941 | 1242 | |
| 注射压力 | Injection pressure | MPa | 100 | 157 |
| 理论塑化速度 | Theoretical plasticizing speed | g/S (PS) | 144 | 144 |
| 柱塞直径 | Injection plug diameter | mm | 250 | 200 |
| 注射行程 | Injection stroke | mm | 1450 | |
| 最大注射速度 | Max. injection speed | mm/s | 43 | |
| 最大螺杆转速 | Screw speed | r/min | 72 | 72 |
| 系统压力 | Sys. Pressure | MPa | 17.5 | |
| 电机总功率 | Pump Motor(Min～Max) | kW | 139.2～142.3 | |
| 电机数量 | number of Motors | PC | 3 | |
| 电热功率 | Heater power | kW | 141 | |
| 温控区数 | Number of temp. control zones | 6+1 | ||
| 锁模力 | Clamping force | kN | 16000 | |
| 开模行程 | Opening stroke | mm | 1550 | |
| 拉杆内间距 | Space between tie bar | mm x mm | 1520×1320 | |
| 最小模具厚度(T型槽） | Min. mould height | mm | 680 | |
| 最大模具厚度(T型槽） | Max. mould height | mm | 1450 | |
| 最大模板距离(T型槽） | Max. Daylight | mm | 3000 | |
| 顶出行程 | Ejector stroke | mm | 400 | |
| 顶出力 | Ejector force forward | kN | 363 | |
| 顶针回缩力 | Ejector force back | kN | 280 | |
| 顶出杆数 | Number of ejector bar | PC | 29 | |
| 料斗容积 | Hopper capacity | kg | 300 | |
| 油箱容量 | Oil tank capacity | L | 1650 | |
| 标准机械外形尺寸(约) | Machine dimensions(L×W×H) | m x m x m | 15x3.56x4.8 | |
| 机器重量(约） | Machine weight | Ton | 85 | |
| 选配机门加宽（单边） | Widen safety gate Optionally (single side) | mm | 250 | |
| 机门加宽机械外形尺寸(约) | Machine dimensions(L×W×H) | m x m x m | 15x4.06x4.8 | |
3. Clients Cases
bottle making machine
4. Bole Competitive Philosophy
Leading technology and performance
China unique producer, central locking toggle
CIML carbon-fiber products intelligent moulding line, made for lightweight of automobile
The performance of Electro- hydraulic hybrid two platen machine has reached the leading level
5. The world`s leading processing equipment
Product Categories : EKH series hydraulic servo energy saving injection moulding machine