W6 CO₂ laser machine Glass Tube
|Payment Type:||T/T,Western Union|
|Terms of Trade:||FOB,CFR,CIF|
|Min. Order:||1 Piece/Pieces|
|Delivery Time:||5 days Days|
|Place of Origin:||Beijing China|
|Certificate:||CE, ISO, SGS|
Model No.: w6
Laser tube is main parts for laser machine, which includes following machine : CO2 laser engraving machine, CO2 laser cutting machine, laser cutter, laser engraver, acrylic laser cutting machine, wood laser cutter, laser cutting machine, laser engraver for metal, metal engraving laser machine, laser marking machine. About laser tube ,to read following information
1. Installation Requirement
Make sure to follow the operation instruction of model W6 as shown in the illustration. The dedicated power P16 should be equipped. The positive pole of laser tube is in high voltage (the ignition voltage is 28kv). It may cause the following consequence when it is failed to follow the instruction: The cutting speed will be slowed because of the deformation of beam output model; Arcing; the inner tube will be punctured by electricity and may cause water leakage.
2. Operation conditions
Water cooling: using purified water; 3 to 5 liter/minute; water temperature: 10℃-40℃.
The operating environment: temperature 2-40℃; humidity 10-60%.
The working current: test current is 32mA. Maximum working current is 32mA. The running current must be kept below 30mA. The life span can reach 10,000 hours if the current is kept below 28mA. The ammeter must be connected to the negative electrode of laser tube.
When it is working under over-high current for long term, the negative pole will appearpurple and the life span will be shortened rapidly.
To protect dust from going into the insulation sheath, please wrap it with plastic film.
3. Working Performance
Engraving function: Auxiliary engraving. When the working current is 4mA and the tube is in the state of preionization, the laser can be used for high-frequency impulse engraving.
4. Key Notes
Do not clean the exterior surface of the output widow mirror with tools such as tampon; otherwise the output power will be seriously affected. The followings are the designated methods to clean up pollution in the exterior surface of window mirror:
1) When the mirror is polluted, do not turn on the laser.
2) Blow the mirror surface sideways with an air blower.
3) Spray the pure alcohol on the mirror surface with sprayer.
4) Turn on the laser after the alcohol gets fully volatilized.
5) If the methods above don't work effectively, it is necessary to ask for the professional to use tampon with alcohol to clean the mirror surface from middle to edge. The best solution is to prevent the window from being polluted.
Attention: it is forbidden to clean the mirror with acetone.
The screw in the front and back ends of the laser tube is not allowed to be moved, otherwise the out power will be declined, even the tube will be scrapped.
Put the acryl 300mm far away from output mirror, when testing the laser spot.
The laser beam is invisible light. Please wear protective glasses when debugging the laser. The positive pole is in high voltage. Pay attention to the security marks.
6. Storage and Transportation Requirement
Pour out cooling fluid in the event of storage and transportation, and cover the output terminal with a dust-proof plastic bag. The storage environment is 2-40℃, and the requested humidity is 10-60%. Pack the laser as in the original way.
Important notes: it is requested to cement the sponge together with laser tube to prevent the tube vertically sliding during transportation. The sponge in the side of output mirror must be 70 mm beyond it, and the sponge in the side of reflecting mirror must be 50 mm wider
JINAN XUANLIN MACHINERY CO., LTD.
Jinan Xuanlin Machinery CO., Ltd is a professional CNC router manufacturer. We adopt many computerized numerical patents. Our company is devoted in the research and development of carving CAD/CAM technology and CNC technology and have obtained remarkable achievement in the design of precise carving machine as well as artistic carving. We are realized industrialization of the CNC technology. Our router series are sold to many European and American countries which have established a leading position in the carving machine field.
Our products have covered woodworking industry, advertising decoration, making label industry as well as crafts and gifts fields. Our products include computer engraving, CNC milling engraver, mold and so on; combination of intensity, speed and reliability as on. It formed our industrialization advantage of XUNLIN series CNC router.
Our products are famous for its low price, good quality and good after sales service. Our market share have been expanding. We are still trying our best to produce innovative products and provide much better products to our customers. Welcome to all customers home and abroad to visit our company and cooperate with us.
- Company Name: JINAN XUANLIN MACHINERY CO., LTD.
- Representative: Liu Qiaozhen
- Product/Service: CNC Routers , Woodworking Machine , Laser Cutter , CNC Plasma , Fiber Laser Cutter Machine , CNC Machinery
- Capital (Million US $): 1000000RMB
- Year Established: 2015
- Total Annual Sales Volume (Million US $): Below US$1 Million
- Export Percentage: 71% - 80%
- Total Annual Purchase Volume (Million US $): Below US$1 Million
- No. of Production Lines: 15
- No. of R&D Staff: 5 -10 People
- No. of QC Staff: 11 -20 People
- OEM Services Provided: yes
- Factory Size (Sq.meters): 10,000-30,000 square meters
- Factory Location: Daliu industrial park Tianqiao district Jinan city
- Contact Person: Ms. Sophia Liu
- Tel: 86-0531-88986282
Premium Related Products